Hydraulic Jump and Froude # in #SWMM5


In this blog we example the Froude Number values computed in SWMM5 as equations, table, graphs and units. We use a QA/QC version of SWMM 5 that lists many more link, node, system and Subcatchment variables than the default SWMM 5 GUI and engine. This blog also applies to #InfoSWMM and any software the uses the #SWMM5 engine.  SWMM 5 computes only one flow in the middle of the link but it uses depth, head, cross sectional area and hydraulic radius at the upstream, midpoint and downstream points of the link (Figure 1).  The Froude # is computed at all three points and if you could see the Froude # you will see a jump at times in a single link (Figure 2).

Figure 1.  Computational points in #SWMM5
Figure 2.  Three locations of the Froude Number - it is possible to see where the Hydraulic Jump occurs in the link.

Comments

  1. BennyJanuary 6, 2017 at 2:58 AM

    Actually I'm having bad luck with you and with the rolex replica sale. All the problems already mentioned have to add that yesterday I made a week watch as this morning was already replica watches sale. That I have to do? Fanciest more money and go to change the battery with only one week of use? This counting the cartier replica uk but it will make me a refund because it is not normal. I think for the problems that are giving me and so you can speak well of you, should give me the fake rolex sale or pay me this money. Please give me a solution. I ordered and paid for a watch, I was then advised that the replica watches sale is out of stock, I selected an alternate, was told there is too much of a price difference. I was then advised that my money would be rolex replica. I have made numerous attempts today to get any further assistance, my emails now go unanswered. I would like to know the status. I am a very reasonable person, I was not replica watches sale, I just want answers. I will give you an opportunity to resolve this matter between us, as a last resort, I will file an IC3 form with the FBI, they cover computer and internet rolex replica sale. If this is unacceptable, then continue with the refund process, I will purchase my replica watches sale from another vendor, they are a dime a dozen on the web.

    ReplyDelete

Post a Comment

Popular posts from this blog

More St Venant Equations in #SWMM5

Image
This blog shows the relationship between the terms dq1, dq2, dq3 and dq4 in the SWMM5 code and the St. Venant Partial Differential Equations. dq2 = Time Step * Area wtd * (Head Downstream – Head Upstream) / Link Length or dq2 = Time Step * Area wtd * (HGL) / Link Length Qnew = (Qold – dq2 + dq3 + dq4) / ( 1 + dq1) when the force main is full dq3 and dq4 are zero and Qnew = (Qold – dq2) / ( 1 + dq1) The dq4 term in dynamic.c uses the area upstream (a1) and area downstream (a2), the midpoint velocity, the sigma factor (a function of the link Froude number), the link length and the time step or dq4 = Time Step * Velocity * Velocity * (a2 – a1) / Link Length * Sigma the dq3 term in dynamic.c uses the current midpoint area (a function of the midpoint depth), the sigma factor and the midpoint velocity dq3 = 2 * Velocity * ( Amid(current iteration) – Amid (last time step) * Sigma dq1 = Time Step * RoughFactor / Rwtd^1.333 * |Velocity| The weighted area (Awtd) is used in the dq2 term of the St...
Read more

Types of Stormwater Inlets from HEC12 and HEC22

Image
Note :   Types  of  Stormwater   Inlets  from  HEC12  and  HEC22 Stormwater   Inlets  consist of four main  types  ( http://onlinemanuals.txdot.gov/txdotmanuals/hyd/storm_drain_inlets.htm ) with most common shown in Figure 1. 1.    Curb opening  inlets  either at a sag or continuous on the street, 2.    Grate  Inlets  either at a sag or in combination with a Curb opening 3.    Slotted Drains in parking lots which can be simulated as curb opening  inlets  and 4.    Combination  inlets  either at a sag or continuous on the street which combine a curb opening inlet and a grate inlet for the  stormwater  runoff A sag inlet is the end of the line for the runoff because the flow and its debris load have no other place to go as described in the  HEC-22  and  HEC-12  manuals and a continuous grade inlet...
Read more