SWMM56

Here is how you map the  shapefile  pipe fields to the  InfoSWMM  data fields.  One note, you had two diameter fields (feet and inches) and the feet column was mostly zero so I used the inch column.  Here are the four steps and mapping you need to import all of the data from your  shapefile .  You will have to use blockedit and convert the diameter from inches to feet in the DB  link  table (Step 5 – note there are still three missing pipe diameters). Step 1.   Use the  GIS   Gateway  command and set up the import of the file name, and ID field Step 2.  Set up the mapping between the  Shapefile  fields and  InfoSWMM .  We used  link  offset and the pipe diameter in inches. Step 3 . Load the mapped  shapefile Step 4.   The imported data from your  shapefile   into  the DB table of  InfoSWMM Step 5   Convert to feet from inches

Importing a Link Shapefile into InfoSWMM via GIS Gateway Here is how you map the shapefile pipe fields to the InfoSWMM data fields.  One note, you had two diameter fields (feet and inches) and the feet column was mostly zero so I used the inch column.  Here are the four steps and mapping you need to import all of the data from your shapefile.  You will have to use blockedit and convert the diameter from inches to feet in the DB link table (Step 5 – note there are still three missing pipe diameters). Step 1.  Use the GIS Gateway command and set up the import of the file name, and ID field Step 2. Set up the mapping between the Shapefile fields and InfoSWMM.  We used link offset and the pipe diameter in inches. Step 3 . Load the mapped shapefile Step 4.  The imported data from your shapefile into the DB table of InfoSWMM Step 5  Convert to feet from inches