GUI Compilation Note for the #SWMM 5.1.x Delphi Code

This is for Students who want to make their own customized version of the SWMM5 GUI Interface. You can use the Embarcadero Starter Version for XE2 to XE7.  Here are the main files you download from the EPA There may be a problem with teechart and the starter version - see the note here http://docwiki.embarcadero.com/RADStudio/XE7/en/FireMonkey_and_TeeChart  I got it work in XE7 but I did have to remove XPPRINTER references from the Delphi code.  



CONTENTS OF SWMM5.1.007_GUI.ZIP
=============================

Note from the EPA: This archive contains source code for the Windows graphical user interface portion of Version 5.1.007 of the Storm Water Management Model (SWMM). The interface was written using Embarcadero's Delphi XE2 (www.embarcadero.com). The name of the Delphi project containing the code is Epaswmm5. All of the files for the project can be found in the GUI5_1_007.ZIP file within this archive.

Before the Epaswmm5 project can be loaded into Delphi's Integrated Development Environment (IDE), several special components must be installed into the IDE's component pallette. The source code for these components is contained in the COMPONENTS.ZIP file in this archive. Consult the Delphi Users Guide for instructions on how to install these components. 

My note:  The Delphi Starter versions for XE2 to XE7 also can create a customized SWMM5.1 GUI.  You can by the Embarcadero Starter Version for $209 USD.  As explained in the readme from the EPA Site, Delphi uses the Delphi Interface (Bullet 1), the F(form files), D(dialog files), U(Utility files), Txt (Interface Rules) as shown in Bullet 2 and Components that work with the Forms of the Delphi Compiler (Bullet 3).  See Figure 1 below for an example. 


Figure 1. Delphi XE7 Interface for SWMM 5.1.007
Here is how to use the Components


CONTENTS OF COMPONENTS.ZIP
==========================
This archive contains the source code for several 32-bit Delphi
custom components. The components and the files used to install
them are listed below.

-------------------------------
OpenTxtFileDialog (OpenDlg.pas)
-------------------------------
Windows standard Open File dialog with a preview window for text files.

---------------------
NumEdit (NumEdit.pas)
---------------------
Text box control that limits entries to valid numerical values.

-----------------------------
PageSetupDialog (PgSetup.pas)
-----------------------------
Dialog control that selects a printer and page orientation, margins,
and headers/footers.

-----------------------------
VirtualListBox (VirtList.pas)
-----------------------------
Listbox control that allows an unlimited number of items.

---------------------------
PrintControl (Xprinter.pas)
---------------------------
Nonvisual control that handles printing of text, tables, and graphics.
Includes a print preview feature. Documentation is provided in the file
Xprinter.doc.

What do the Components look like?
Figure 2. Delphi Components on a Form


Comments

Post a Comment

Popular posts from this blog

Orifice and Weir flow calculations

Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e., the fraction opened) changes, flow coefficients for both orifice and weir behavior are computed as follows: a. For side orifices: Define Hcrit = h/2 where h is the opening height. b. For bottom orifices: i. For a circular orifice, compute area over length (i.e., circumference) as AL = h /4. ii. For a rectangular orifice compute AL = h*w/(2*(h+w)) where w is the opening width. iii. Compute Hcrit = Cd*AL/0.414 where Cd is the orifice discharge coefficient. At step 1b, the critical head for the bottom orifice, where orifice flow turns into weir flow, is found by equating the result of the orifice equation to that of the weir equation Cd*Area*sqrt(2g)*sqrt(Hcrit) = Cw*Length*sqrt(Hcrit)*Hcrit or Hcrit = (Cd * Area) / (Cw/sqrt(2g) * Length) The value of Cw/sqrt(2g) for a sharp crested weir is 0.414.
Read more

SWMM 5 Error Messages

Engine Error Number Description ERROR 101: memory allocation error.                                                                                             ERROR 103: cannot solve KW equations for Link                                                                                   ERROR 105: cannot open ODE solver.                                                                                              ERROR 107: cannot compute a valid time step.                                                                                     ERROR 108: ambiguous outlet ID name for Subcatchment                                                                            ERROR 109: invalid parameter values for Aquifer                                                                                  ERROR 110: ground elevation is below water table for Subcatchment                                                         
Read more

EMC Washoff in SWMM5

Image
There are four steps to using EMC concentrations in your network: 1. Define your pollutant by adding a pollutant using the Data=>Quality=>Pollutant command : 2. Define the Land Use by using the Data=>Land Uses command or the Land Use Editor: 3. Define Buildup to be None by clicking on the None Tab: 4. Define the EMC Washoff concentration by clicking on the Washoff Tab: This is where you would add a GW concentration More: http://www.swmm2000.com/
Read more