Innovyze Introduces H2ONET V11 for AutoCAD 2013


Innovyze Introduces H2ONET V11 for AutoCAD 2013
New Release Delivers Fast, High-Fidelity, High-Performance Smart Water Network Modeling and Simulation Capabilities for Power Users
Broomfield, Colorado USA, September 4, 2012 — Redrawing the boundaries of innovation in the waterworks industry, Innovyze, a leading global innovator of intelligent business analytics software and technologies for wet infrastructure, today released its V11 Generation of H2ONET for AutoCAD® 2013 (Autodesk, San Rafael, CA), enabling engineers to work faster and more efficiently than ever with very large network models.
Built atop AutoCAD®, the world’s leading CAD platform, H2ONET delivers breakthrough performance in integrated real-time network modeling, GIS data exchange, spatial database query and analysis across multiple data types, and the sophisticated mapping essential to complete infrastructure (asset) management and business planning. With H2ONET’s pioneering functionality and state-of-the-art computational algorithms, engineering professionals can directly access CAD and GIS datasets, extract pertinent modeling information, and automatically construct, skeletonize, load, calibrate, analyze, design, operate, and optimize any network model — saving time and money across the enterprise. Such capabilities prove invaluable to water utilities in complying with drinking water quality regulations, understanding and controlling taste and odor problems, developing cost-effective energy solutions for water system operations, improving system reliability and integrity, optimizing capital improvement and rehabilitation programs, enhancing community relations, and planning sound security measures.
V11 marks another milestone in the evolution of Innovyze’s flagship product, H2ONET, which has set an industry standard for comprehensive CAD-based water distribution engineering and proven to be the premier choice for major ENR design firms and large water utilities around the world. Sophisticated enough for the most complex of projects, yet approachable for beginners, the new H2ONET V11 has been engineered at deep levels to provide advanced modeling functionality and exponential increases in efficiency and speed while simplifying use. In addition to supporting the newly released AutoCAD® 2013, H2ONET V11 introduces features that advance core database and graph reporting functions, delivering network modeling capabilities that are faster and more intuitive than ever before. These enhancements propel H2ONET product suite applications into the next generation and carry on Innovyze’s time-honored practice of continually adding value to its software, bringing unsurpassed modeling innovations into the mainstream, and backing its products with superior high-touch technical support.
“Our priorities have always been to advance the frontiers of modeling technology and support our customers’ successes by making them more productive and competitive,” said Paul F. Boulos, Ph.D., BCEEM, Hon.D.WRE,Dist.D.NE, F.ASCE, President and Chief Operating Officer of Innovyze. “Our customers expect accuracy, efficiency, and throughput to generate outstanding designs and modeling solutions as quickly as possible. Supporting AutoCAD® 2013, H2ONET V11 delivers on our promise to equip customers with the ultimate intelligent decision support tool for water distribution systems. With this latest version, H2ONET once again raises the bar for fast, high-fidelity, high-performance smart water network modeling and management with unrivaled power, cutting-edge capabilities, rich functionality, and ease of use. From top to bottom, this release is designed to enable world-record modeling performance — allowing our users to increase productivity and quality while achieving their engineering and business goals.

Comments

Post a Comment

Popular posts from this blog

Orifice and Weir flow calculations

Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e., the fraction opened) changes, flow coefficients for both orifice and weir behavior are computed as follows: a. For side orifices: Define Hcrit = h/2 where h is the opening height. b. For bottom orifices: i. For a circular orifice, compute area over length (i.e., circumference) as AL = h /4. ii. For a rectangular orifice compute AL = h*w/(2*(h+w)) where w is the opening width. iii. Compute Hcrit = Cd*AL/0.414 where Cd is the orifice discharge coefficient. At step 1b, the critical head for the bottom orifice, where orifice flow turns into weir flow, is found by equating the result of the orifice equation to that of the weir equation Cd*Area*sqrt(2g)*sqrt(Hcrit) = Cw*Length*sqrt(Hcrit)*Hcrit or Hcrit = (Cd * Area) / (Cw/sqrt(2g) * Length) The value of Cw/sqrt(2g) for a sharp crested weir is 0.414.
Read more

SWMM 5 Error Messages

Engine Error Number Description ERROR 101: memory allocation error.                                                                                             ERROR 103: cannot solve KW equations for Link                                                                                   ERROR 105: cannot open ODE solver.                                                                                              ERROR 107: cannot compute a valid time step.                                                                                     ERROR 108: ambiguous outlet ID name for Subcatchment                                                                            ERROR 109: invalid parameter values for Aquifer                                                                                  ERROR 110: ground elevation is below water table for Subcatchment                                                         
Read more

EMC Washoff in SWMM5

Image
There are four steps to using EMC concentrations in your network: 1. Define your pollutant by adding a pollutant using the Data=>Quality=>Pollutant command : 2. Define the Land Use by using the Data=>Land Uses command or the Land Use Editor: 3. Define Buildup to be None by clicking on the None Tab: 4. Define the EMC Washoff concentration by clicking on the Washoff Tab: This is where you would add a GW concentration More: http://www.swmm2000.com/
Read more