InfoSWMM 2D Version 2.0 for ArcGIS 10

MWH Soft Releases InfoSWMM 2D Version 2.0 for ArcGIS 10, Raising Bar for Urban Drainage Modeling and Simulation

Latest Release Solidifies Product as Leading GIS-centric Urban Drainage Modeling and Management Solution

Broomfield, Colorado USA, October 12, 2010

MWH Soft, a leading global innovator of wet infrastructure modeling and simulation software and technologies, today announced the worldwide availability of the V2.0 Generation of its industry-leading InfoSWMM 2D for ArcGIS 10 (Esri, Redlands, CA). InfoSWMM 2D delivers new ways to quickly build and analyze very large and comprehensive two-dimensional (2D) models that reliably simulate urban stormwater, sanitary sewers, river flooding and pollutant transport. It allows users to accurately predict the extent and duration of urban and rural flooding for comprehensive stormwater management directly within the powerful ArcGIS environment.

A fully hydrodynamic geospatial stormwater modeling and management software application, InfoSWMM 2D can be used to model the entire land phase of the hydrologic cycle as applied to urban stormwater systems. The model can perform single-event or long-term (continuous) rainfall/runoff simulations accounting for climate, soil, land use, and topographic conditions of the watershed. In addition to simulating runoff quantity, InfoSWMM 2D can reliably predict runoff quality, including buildup and washoff of pollutants from primarily urban watersheds. It also features very sophisticated Real-Time Control (RTC) schemes for the operational control and management of hydraulic structures.

Built atop ArcGIS and using exceptionally robust and efficient numerical simulation capabilities, InfoSWMM 2D seamlessly integrates advanced 1D and 2D functionalities in one environment, enabling users to model the most complex storm and combined sewer collection systems and surface flooding with incredible ease and accuracy.

When overland flows are routed through a complex urban area or highly varied terrain, the numerous elevation changes and obstacles can significantly impact results. This problem can be further complicated by the presence of sewer networks, where flows can both enter and exit the system during flood events. With InfoSWMM 2D, users can employ 1D simulation to identify the location of flooding and 2D simulation to investigate the direction and depth of flood flows in specific areas.

The full 2D free-surface shallow water equations are solved using a highly advanced finite volume method, which is particularly suitable for rapidly varying flood flows such as those through steep streets and road junctions and those associated with bank overtopping or breaching. The unparalleled 1D/2D dynamic linking capabilities of InfoSWMM 2D give engineers the unprecedented power to analyze and predict potential flood extents, depth and velocity and accurately model the interaction of surface and underground systems in an integrated 1D/2D environment. The software can also be effectively used to simulate and analyze tidal surges, dam breaks and breaches on sewer networks. The combined water level and velocity results throughout the flooded areas can be viewed as graphs, tables or animated, thematic flood maps.

“We’re deeply committed to providing a geospatial modeling experience that is both intuitive and powerful, and InfoSWMM 2D V2.0 embodies that commitment,” said Paul F. Boulos, Ph.D., Hon.D.WRE, F.ASCE, President and Chief Operating Officer of MWH Soft. “This release, following closely on May’s version 1.0, delivers major geospatial technological enhancements in short release cycles to make sure our customers are always equipped with the ultimate ArcGIS-centric decision support tool for stormwater and urban drainage systems. It greatly extends the core features of InfoSWMM, providing the most powerful and comprehensive ArcGIS-centric tool kit ever for managing the risks of urban and rural flooding.”

Pricing and Availability
Upgrade to InfoSWMM 2D V2.0 is now available worldwide by subscription to the MWH Soft Gold program. Subscription members can immediately download the new version free of charge directly from www.mwhsoft.com. The MWH Soft Subscription Program is a friendly customer support and software maintenance program that ensures the longevity and usefulness of MWH Soft products. It gives subscribers instant access to new functionality as it is developed, along with automatic software updates and upgrades. For the latest information on the MWH Soft Subscription Program, visit www.mwhsoft.com or contact your local MWH Soft Channel Partner.

Comments

Post a Comment

Popular posts from this blog

Orifice and Weir flow calculations

Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e., the fraction opened) changes, flow coefficients for both orifice and weir behavior are computed as follows: a. For side orifices: Define Hcrit = h/2 where h is the opening height. b. For bottom orifices: i. For a circular orifice, compute area over length (i.e., circumference) as AL = h /4. ii. For a rectangular orifice compute AL = h*w/(2*(h+w)) where w is the opening width. iii. Compute Hcrit = Cd*AL/0.414 where Cd is the orifice discharge coefficient. At step 1b, the critical head for the bottom orifice, where orifice flow turns into weir flow, is found by equating the result of the orifice equation to that of the weir equation Cd*Area*sqrt(2g)*sqrt(Hcrit) = Cw*Length*sqrt(Hcrit)*Hcrit or Hcrit = (Cd * Area) / (Cw/sqrt(2g) * Length) The value of Cw/sqrt(2g) for a sharp crested weir is 0.414.
Read more

SWMM 5 Error Messages

Engine Error Number Description ERROR 101: memory allocation error.                                                                                             ERROR 103: cannot solve KW equations for Link                                                                                   ERROR 105: cannot open ODE solver.                                                                                              ERROR 107: cannot compute a valid time step.                                                                                     ERROR 108: ambiguous outlet ID name for Subcatchment                                                                            ERROR 109: invalid parameter values for Aquifer                                                                                  ERROR 110: ground elevation is below water table for Subcatchment                                                         
Read more

EMC Washoff in SWMM5

Image
There are four steps to using EMC concentrations in your network: 1. Define your pollutant by adding a pollutant using the Data=>Quality=>Pollutant command : 2. Define the Land Use by using the Data=>Land Uses command or the Land Use Editor: 3. Define Buildup to be None by clicking on the None Tab: 4. Define the EMC Washoff concentration by clicking on the Washoff Tab: This is where you would add a GW concentration More: http://www.swmm2000.com/
Read more